11
14
1
1
2
TM 9-4940-568-34
7-64
7-7. CAMSHAFT AND VALVE TAPPETS REPLACEMENT (CONT).
(12)
After tappet has been pulled up into
position, slide plastic trough (11) back into
cam bore and rotate it 1/2 turn. This will
position round side of plastic trough up,
which will hold tappet in place.
(13)
Remove installation tool (14) from tappet.
(14)
Install a wooden dowel (1) into top of
tappet (2). Wrap rubber band around
wooden dowels to secure tappets.
(15)
Repeat Steps (4) through (14) until all
tappets have been installed.
(16)
Apply a coat of lubricating oil to front of
camshaft bore.
