12
11
14
ROD
TM 9-4940-568-34
7-62
7-7. CAMSHAFT AND VALVE TAPPETS REPLACEMENT (CONT).
(2)
Ensure lubricating oil hole is aligned. A
0.128 in. (3.2 mm) diameter rod must be
able to pass through lubricating oil hole.
(3)
Measure installed camshaft bushing (12).
Camshaft Bushing Bore
in.
mm
2.1302
MIN.
(54.107)
2.1317
MAX.
(54.146)
(4)
Insert plastic trough (11) full length of cam
bore.
(5)
Lower tappet installation tool (14) down
push tube hole, through tappet bore, and into
plastic trough (11).
(6)
Feed installation tool (14) through cam
bores by carefully pulling plastic
trough/installation tool out the front. The
barrier at rear of plastic trough will pull tool
out most of the time.
