TM 9-4940-568-34
6-41
(5) With help from assistant, remove rod (7)
from cylinder barrel (1).
(6) With help from assistant, remove
cylinder barrel (1) from vise.
(7) With help from assistant, place rod (7) in
vise.
(8) Note position and remove and discard
seal assembly (8) from piston (9).
(9) Remove setscrew (10) and piston (9)
from rod (7).
(10) Note position and remove guide lock
ring (11) from piston (9).
(11) Note position and remove two backup
rings (12) and preformed packings (13)
from piston (9). Discard backup rings
and preformed packings.
(12) Remove spacer (14) from rod (7).
(13) Remove cylinder head (15) and
retaining ring (3) from rod (7).
(14) Remove wiper ring (16) from retaining
ring (3).
(15) Remove and discard seal (17) from
cylinder head (15).
(16) Remove and discard preformed packing
(18) and backup ring (19) from cylinder
head (15).
(17) Remove and discard rod seal (20),
buffer seal (21), and wiper ring (22) from
cylinder head (15).
