TM 9-4940-568-34
6-45
(5) Remove two plugs (7) from cylinder
barrel (1).
(6) Remove two preformed packings (8)
from plugs (7). Discard preformed
packings.
CAUTION
Do not pry cylinder head from
cylinder barrel. Failure to comply
will
result
in
damage
to
equipment.
(7) Remove rod (9) from cylinder barrel (1).
(8) Remove cylinder barrel (1) from vise.
(9) Place rod (9) in vise.
(10) Remove guide lock ring (10) and seal
(11) from piston (12). Discard seal.
(11) Remove setscrew (13), piston (12), and
spacer (14) from rod (9).
(12) Remove guide lock ring (15) and seal
(16) from piston (12). Discard seal.
(13) Remove preformed packing (17) and
two backup rings (18) from piston (12).
Discard preformed packing and backup
rings.
