TM 9-4940-568-34
6-34
6-7.
GEAR SET REPAIR (Continued)
(26) Apply sealing compound to threads of
six screws (6) and silicone sealant to
mating surface of ring gear (5).
(27) Install RH drum end (8) on ring gear (5)
with six washers (7) and screws (6).
(28) Tighten six screws (6) to 28 lb-ft
(38 N.m).
(29) Install ring gear (5) in housing (4).
(30) Apply sealing compound to threads of
five screws (1).
(31) Install retaining plate (3) on housing (4)
with five washers (2) and screws (1).
(32) Tighten five screws (1) to 68 lb-ft
(92 N.m).
END OF TASK
Follow-On Maintenance
Install cable follower
(para 3-22).
Install hoist assembly
(para 3-26)
Install oil filled disc brake
assembly (para 3-25).
Install hoist hydraulic
motor (para 3-24).
Install hoist motor control
valve (para 3-38).
Check crane for proper
operation and hydraulic
leaks (TM 9-4940-568-10).
Load test crane
(para 3-5).
