7
6
1
2
4
5
TM 9-4940-568-34
5-60
5-11. FLYWHEEL RING/GEAR AND FLYWHEEL HOUSING REPLACEMENT (CONT).
NOTE
Be sure sealing ring is not
damaged during installation.
(6)
Install eight screws (6) in flywheel housing
(7) and tighten in sequence shown. Tighten
screws 57 lb-ft (77 N.m).
If installing new flywheel
housing perform procedure “f.
Flywheel Housing Bore
Alignment Check” and procedure
“g. Flywheel Housing Face
Alignment Check”.
(7)
Install hose (4) in bracket (5).
(8)
Install two screws in front of crankshaft, or
similar device, to hold crankshaft from
turning.
(9)
Install flywheel ring/gear assembly (2) on
engine with eight screws (1). Tighten
screws to 101 lb-ft (137 N.m).
(10) Perform h. Follow-On Maintenance.
