4
3
1
8
3
9
2
7
6
3
9
7
TM 9-4940-568-34
5-52
5-10. CRANKSHAFT REAR SEAL REPLACEMENT (CONT).
(2)
Insert feeler gage or shim stock between
rear cover (3) and oil pan gasket (4). Move
feeler gage or shim stock back and forth to
release gasket from rear cover.
(3)
Remove four oil pan mounting screws (1)
from oil pan (2).
(4)
Remove six screws (5), gasket (6) and rear
cover (3) from crankshaft flange (7).
Discard gasket.
(5)
Remove oil seal (8) from rear cover (3).
Do not nick or gouge crankshaft
with chisel. If crankshaft is
damaged, it must be replaced.
NOTE
If crankshaft currently has a wear
sleeve, it must be removed before
installing a new one.
Use a dull chisel that is only as
wide as the wear sleeve.
(6)
Make one or two soft blows with a hammer
to make chisel marks across wear sleeve (9).
This will expand wear sleeve allowing wear
sleeve to be removed.
(7)
Remove wear sleeve (9) from crankshaft
flange (7).
