TM 9-4940-568-34
3-74
3-20. TENSION LINK REPLACEMENT (Continued)
(4) Remove two screws (7), washers (8),
and bushings (9) from rivet eyebolts
(10).
(5) Remove two rivet eyebolts (10) from
pivot shaft (11).
WARNING
To prevent personal injury, ex-
treme care must be taken to prop-
erly handle heavy overhead ob-
jects. Make sure all slings and
straps are safe to use and are se-
cured properly. Make sure there
are no obstacles in the way. Keep
clear of all suspended loads.
Remove pivot shaft only far
enough to release tension link.
Failure to comply may result in in-
jury to personnel or damage to
equipment.
(6) With help from assistant, attach lifting
device to tension link (6) and drive pivot
shaft (11) out of tension link (6).
(7) Remove tension link (6) from turntable
(12).
(8) Remove four grease fittings (13) from
tension link (6).
b.
Installation
NOTE
Left and right side tension links
are installed the same. Right
side shown.
(1) Install four grease fittings (13) in tension
link (6).
