TM 9-4940-568-34
3-43
b. Installation
(1) Install disc (7) in swing drive assembly
(5).
(2) Install three stators (6) and two discs (7)
in swing drive assembly (5).
(3) Apply adhesive to mating surface of
brake cylinder housing (4).
NOTE
Brake is spring loaded.
(4) Aline and install brake cylinder housing
(4) on swing drive assembly (5).
(5) Apply sealing compound to threads of
four screws (1).
(6) Install two stops (3), four washers (2)
and screws (1). Evenly tighten screws
to 35 lb-ft (47 N.m).
END OF TASK
Follow-On Maintenance
Install swing drive orbit
motor (para 3-12).
