6
2
7
6
8
2
2
9
7
8
2
9
TM 9-4940-568-20
12-3
(3)
Remove four screws (6), washers (7) and locknuts (8) from collar (2). Discard locknuts.
(4)
Remove collar (2) from shelter (9).
b.
Clean and Inspect.
(1)
Clean surface around circumference of vent hole to insure proper sealing.
c.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use
in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or
clothing, wash immediately with
soap and water.
(1)
Apply adhesive on underside of flange on
collar (2).
(2)
Position collar (2) in hole of shelter (9)
aligning holes from shelter and collar (2).
(3)
Install four screws (6), washers (7) and
locknuts (8) on collar (2) and shelter (9).
