13-2. FIRE EXTINGUISHER AND BRACKET REPLACEMENT

CHAPTER 13 FIRE FIGHTING EQUIPMENT MAINTENANCE

APPENDIX A REFERENCES - TM-9-4940-568-20_745

TM-9-4940-568-20 Forward Repair System (FRS) M7 Manual
Page Navigation
721

TM 9-4940-568-20 13-2 Materials/Parts Screw, Self-Tapping (2) (Item 99, Appendix F) This task covers: a. Removal b. Installation INITIAL SETUP Equipment Condition FRS unloaded, (TM 9-4940-568-10) Tools and Special Tools Tool Kit, General Mechanic’s: Automotive (Item 30, Appendix G) 13-2. FIRE EXTINGUISHER AND BRACKET REPLACEMENT. a. Removal. 1 2 4 3 NOTE The following procedures apply to both interior and exterior fire extinguishers. Interior fire extinguisher shown. (1) Remove fire extinguisher (1) from fire extinguisher mount (2). (2) Remove two self-tapping screws (3) and fire extinguisher mount (2) from shelter wall (4). Discard self-tapping screws. b. Installation. (1) Install fire extingusher mount (2) to shelter wall (4) with two screws (3). (2) Install fire extinguisher (1) on fire extinguisher mount (2). END OF TASK

Privacy Statement
Press Release
Contact