TM 9-4940-568-20
11-73/(11-74 blank)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Air compressor air tank drained,
(TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
11-15. AIR REGULATORS/WATER SEPARATORS/AIR LUBRICATORS REPLACEMENT.
a.
Removal.
2
1
1
3
NOTE
The following procedures are identical for both air regulators and air lubricators. The
right-side pneumatic air regulator and lubricator are shown.
(1)
Remove four socket head screws (1) and air lubricator (2) from bracket (3).
b. Installation.
(1)
Install air lubricator (2) with four socket head screws (1) on bracket (3).
c.
Follow-On Maintenance:
Start air compressor and check for leaks.
Fill air lubricator (TM 9-4940-568-10)
END OF TASK
