3
2
4
1
8
6
4
5
7
6
8
10
9
TM 9-4940-568-20
11-27
(4)
Remove heater (6) and thermostat (8) from
air compressor (10).
b. Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealing compound to threads of
thermostat (8) and heater (6).
(2)
Install thermostat (8) and heater (6) on air
compressor (10).
(3)
Install junction box (4) to thermostat (8) and
heater (6) with two nuts (9).
(4)
Connect two wires (7) from thermostat (8)
and two wires (5) from heater (6) as noted
during removal.
(5)
Install gasket (3) and cover (2) on junction
box (4) with four screws (1).
c.
Follow-On Maintenance:
Fill air compressor crankcase with oil, (Para 11-9).
Connect batteries, (TM 9-4940-568-10).
Start generator, (TM 9-4940-568-10).
Start air compressor and check operation,
(TM 9-4940-568-10).
END OF TASK
