TM 9-4940-568-20
8-68
8-22. FUEL HOSES AND FITTINGS REPLACEMENT (CONT).
b.
Fuel Return Hose.
6
7
8
9
8
(1)
Removal.
(a)
Loosen clamp (7) and remove hose (8) from fuel return line (9).
NOTE
Threaded end of hose does not swivel.
(b)
Remove hose (8) from fuel tank (6).
(2)
Installation.
Adhesives, solvents and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well–ventilated area. If adhesive, solvent or sealing compound gets
on skin or clothing, wash immediately with soap and water.
(a)
Apply sealing compound to threads of hose (8).
(b)
Install hose (8) on fuel tank (6).
(c)
Install hose (8) on fuel return line (9) and tighten clamp (7).
