TM 9-4940-568-20
8-72
Materials/Parts
Gasket (Item 16, Appendix F)
Locknut (4) (Item 44, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Batteries disconnected, (TM 9-4940-568-10)
Remove air compressor filter, (Para 11-6)
Remove brush guard support arm, (Para 4-8)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
Lifting Device (Minimum capacity 300 lbs
[136 kg])
8-23. EXHAUST SYSTEM REPLACEMENT.
Materials/Parts – Continued
Lockwasher (4) (Item 62, Appendix F)
Rivet (4) (Item 98, Appendix F)
a.
Removal.
1
4
2
3
2
3
4
5
Storage rack weighs approximately 300 lbs (136 kg). Use the aid of an assistant when
lifting storage rack to prevent injury to personnel.
(1)
Remove two top screws (1), locknuts (2) and four washers (3) from storage rack (4). Retain locknuts
(2)
Loosen two bottom locknuts (5) on storage rack (4).
(3)
With the aid of an assistant, pivot storage rack (4) up and position two screws (1), washers (3) and
locknuts (2) (removed from top hole) in storage rack to lock in upright position.
