TM 9-4940-568-20
8-65
Materials/Parts
Cable Ties (Item 10, Appendix C)
This task covers:
a. Fuel Pump Supply Hose (w/Filter) b. Fuel Return Hose
c. Heater Supply Hose
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Batteries disconnected, (TM 9-4940-568-10)
Remove rear panel, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
Cap and Plug Set (Item 3, Appendix G)
Pan, Drain (Item 20, Appendix G)
8-22. FUEL HOSES AND FITTINGS REPLACEMENT.
Materials/Parts - Continued
Sealing Compound (Item 32, Appendix C)
Tags, Identification (Item 40, Appendix C)
Equipment may be damaged by foreign matter if hoses, tubes and connectors are not
plugged and capped when removed.
NOTE
Note location and position of hoses, reducers, elbows and fittings prior to removal.
Remove cable ties as required.
Cap hoses, fittings, and connections upon removal.
Position drain pan under hose to catch excess fuel.
