TM 9-4940-568-20
8-3
b. Fill.
Ensure engine oil drain valve is closed and engine is completely drained of oil. Failure
to comply may result in damage to equipment.
(1)
Remove engine fill cap (1) from engine valve cover (2).
(2)
Fill engine with oil in accordance with Lubrication Table 2-2, Para 2-9.
(3)
Install engine fill cap (1) in engine valve cover (2).
c.
Follow-On Maintenance:
Start and run engine for three minutes, (TM 9-4940-568-10).
Check for oil leaks, (TM 9-4940-568-10).
Shut OFF engine and allow oil to drain for 20 minutes, (TM 9-4940-568-10).
Check engine oil level and add engine oil as needed, (TM 9-4940-568-10).
Install rear left panel, (TM 9-4940-568-10).
END OF TASK
1
2
