ENGINE ROCKER ARM, COVER AND GASKET REPLACEMENT (CONT).

ENGINE ROCKER ARM, COVER AND GASKET REPLACEMENT (CONT). - TM-9-4940-568-20_488

ENGINE ROCKER ARM, COVER AND GASKET REPLACEMENT (CONT). - TM-9-4940-568-20_490

TM-9-4940-568-20 Forward Repair System (FRS) M7 Manual
Page Navigation
468

12 13 13 12 14 14 14 15 6 5 6 5 14 INTAKE EXHAUST TM 9-4940-568-20 8-7 (6) Inspect pushrod ball and socket for signs of scoring. Check for cracks where the ball and the socket are pressed in the tube. (7) Check push rods for roundness and staightness. d. Assembly. (1) Install two adjusting screws (6) and jam nuts (5) on rocker levers (14). Do not tighten. (2) Lubricate rocker lever shaft (15) with lubricating oil. Use care when removing or installing retaining rings. Retaining rings are under spring tension and could cause severe eye injury. NOTE Position intake and exhaust rocker arm levers noted during disassembly. (3) Install two rocker levers (14) on rocker lever shaft (15) with two thrust washers (13) and retaining rings (12).

Privacy Statement
Press Release
Contact