TM 9-4940-568-20
4-26
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
4-6. HOOK ARM GUARD REPLACEMENT.
Materials/Parts
Locknut (6) (Item 42, Appendix F)
Personnel Required
Two
a.
Removal.
6
1
2
4
5
5
3
Hook arm guard weighs approximately 50 pounds (22 kg). Use an assistant to help
remove hook arm guard or possible injury to personnel may result.
(1)
Remove six locknuts (1), screws (2), 12 washers (3), two retaining brackets (4) and hook arm guard (5)
from brush guard (6). Discard locknuts.
b. Installation.
(1)
Install hook arm guard (5), two retaining brackets (4), 12 washers (3), six screws (2) and locknuts (1) on
brush guard (6).
END OF TASK
