TM 9-4940-568-20
4-25
32
b. Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Coat threads of two screws (3) with sealing
compound.
(2)
Install door latch bracket (2), door latch (5)
on shelter (6) with two washers (4) and
screws (3).
(3)
Latch shelter door (7) and check for proper
seal of door. If proper seal of door is
achieved, proceed to Step (4). If proper seal
of door is not achieved, perform c.
adjustment procedure.
(4)
Install lock (1) on door latch bracket (2).
c.
Adjustment.
(1)
Loosen jam nut (8) and turn j-bolt (9) one
turn clockwise to tighten or one turn counter
clockwise to loosen and close shelter door
(7).
(2)
Repeat Step (1) until shelter door (7) seals.
(3)
Tighten jam nut (8) on j-bolt (9).
END OF TASK
7
8
9
2
5
3
4
6
1
2
