20
19
21
16
18
15
17
TM 9-4940-568-10
2-144
2-29. MATERIAL HANDLING CRANE (MHC) OPERATION (CONT).
k.
Stow Outriggers and Jack Cylinders.
Keep hands and feet away from outrigger jacks while operating lever to avoid injury.
Use caution when handling outrigger pads. Sharp edges can injure hands.
NOTE
Left and right outrigger pads are removed/installed the same way. Left side is shown.
(1)
Remove retaining pin (18) from outrigger pad (16).
NOTE
Operate LH O/R JACK lever and RH O/R JACK lever at the same time.
(2)
Move LH O/R JACK lever (20) and RH O/R JACK lever (19) to UP position until outrigger jack
cylinders (17) are fully retracted.
NOTE
Left and right outrigger pads are stowed the same way. Left side is shown.
(3)
Install retaining pin (18) in outrigger pad (16).
(4)
Stow outrigger pad (16) on stowage posts located on rear of FRS flatrack (21) and install two pins (15).
(5)
Repeat Steps (3) and (4) for right outrigger pad.
