27
28
TM 9-4940-568-10
2-137
h.
Raise and Lower Load.
NOTE
Range diagram boom angles are reference only. Each lift is to be planned in advance:
Know the weight of the load.
Know the distance of the load from the crane.
Check on the load chart if the lift is achievable.
Configure the crane appropriately (in terms of boom length) or relocate FRS or load
as necessary.
(1)
Refer to range diagram and load chart on MHC main control panel or on remote control, (Para 2-29b) to
determine correct boom angle and boom length setting.
(2)
Move BOOM lever (27) to UP position until boom angle indicator (28) shows correct boom angle as
determined in Step (1).
