TM 9-4940-568-10
2-103
14
13
11
9
15
(6)
Remove collet nut (13) from torch head (9).
NOTE
Smooth side of leather shield should face away from the torch head.
(7)
Install leather shield (11) onto torch head (9).
(8)
Install collet nut (13) onto torch head (9).
(9)
Position leather shield (11) so long end covers the oxygen control lever (14).
(10)
Loosen collet nut (13) 1/2 turn.
(11)
Insert recessed rod end (15) into the collet nut (13) until bottomed out on the collet washer and tighten
collet nut.
