TM 9-2330-359-14&P
4-22. STOP, TAIL, AND DIRECTIONAL LIGHT MAINTENANCE (M872 SOUTHWEST MODEL
AND M872A3).
This Task Covers:
a.
Lamp Replacement
c .
Installation
b.
Removal
Initial Setup:
Equipment Conditions:
Materials/Parts:
Towing vehicle electrical connector disconnected
from semitrailer (para 2-18).
Marker tags (Item 13, Appendix E)
TooIs/Test Equipment:
General mechanic’s tool kit
Common no. 1 shop set
1.
Remove snapring (1) and lens (2) from body (3).
2.
Remove lamp (4) from socket (5) by pushing lamp
in and turning counterclockwise.
3 .
Install lamp (4) in socket (5) by pushing lamp in
and turning clockwise.
4.
Install lens (2) and snapring (1) on body (3).
1.
Tag two wires (7) for installation. Cut wires on each
side of crimping.
2.
Remove 3 screws (8) and body (3) from frame (6).
1 .
Install body (3) on frame (6) with 3 screws (8).
2.
Connect two wires (7) by splicing using electrical
connector repair tool kit.
TA508004
4-23
