TM 9-2330-359-14&P
4-20. RESISTOR AND TERMINAL BOARD REPLACEMENT (Con’t).
6.
Remove four locknuts (15), screws (14), and terminal board (6) from nose box cover (3). Discard locknuts.
7.
Remove two locknuts (17), screws (16), and terminal board (9) from nose box cover (3). Discard locknuts.
1.
Install terminal board (9) on nose box cover (3) with two screws (16) and new locknuts (17).
2.
Install terminal board (6) on nose box cover (3) with four screws (14) and new locknuts (15).
3.
Position wires (7 and 11) on terminal board (9) and tighten screws (8 and 10).
4.
Position wires (5) on terminal board (6) and tighten screws (4).
5.
Install resistor (13) on terminal boards (6 and 9) with two screws (12).
6.
Install nose box cover (3) on nose box (1) with eight screws (2).
FOLLOW-ON TASKS:
Connect towing vehicle electrical connector to semitrailer (para 2-10).
Check operation of lights.
TA508002
4-21
