TM 9-2330-359-14&P
4-25. CLEARANCE LIGHT MAINTENANCE (M872A3) (Con’t).
1 .
Remove lamp assembly from framerail (subpara
a).
NOTE
Step 2 applies to all clearance lights except
rear clearance lights located on mount bar.
2.
Remove nut (5), washer (6), ground wire (7), two
screws (8 and 9), and mounting plate (1) from
framerail (3). Discard Iockwasher.
NOTE
Steps 3 and 4 apply only to rear clearance lights located on mount bar.
3.
Remove nut (5), washer (6), ground wire (7), four
screws (11 and 13), and mount bar (12) from
framerail (3). Discard Iockwasher.
4.
Remove grommet (10) from framerail (3). Discard
grommet if damaged.
N O TE
Steps 1 through 4 apply only to rear clearance
lights located on mount bar.
1.
Install grommet (10) in framerail (3).
2.
Install lamp assembly on mount bar (12) (subpa-
3.
4.
ra a).
Install mount bar (12) on framerail (3) with four
screws (11 and 13).
Position ground wire (7) on screw (11) and install
washer (6) and nut (5).
TA508008
4-28
