TM 9-2330-324-14&P
0029 00-3/4 blank
INTERVEHICULAR CABLE ASSEMBLY REPLACEMENT—Continued
0029
00
INSTALLATION
1.
Slide intervehicular cable assembly (2) inside frame from front until plug connectors (12) are
exposed.
2.
Connect six plug connectors (12) to chassis wiring harness (11).
3.
Remove tags if used.
4.
Pull forward intervehicular cable assembly (2) until plug connectors (12) are inside frame and there is
60 ± 0.5 in. (152 ± 1 cm) of cable exposed from main plug on end to point where cable is clamped.
5.
Install ground wire (8), clamp (9), screw (10), new lockwasher (7), and nut (6).
6.
Install clamp (3), screw (1), new lockwasher (4), and nut (5) on intervehicular cable assembly (2).
12
1
5
11
2
2
78
11
4
3
2
6
9
10
FOLLOW-ON TASKS
1.
Connect intervehicular cable assembly to towing vehicle (page 0007 00-5).
2.
Check operation of lights.
END OF TASK
