TM 9-2330-324-14&P
0028
00-2
CHASSIS WIRING HARNESS REPLACEMENT—Continued
0028
00
REMOVAL
1.
Remove nut (1), lockwasher (2), screw (4), and clamp (3) from intervehicular cable assembly (5).
Discard lockwasher.
2.
Pull back chassis wiring harness (6) until plug connectors (7) are exposed.
3.
Tag wires for installation if identification bands are missing or not legible (WP 0030 00).
4.
Disconnect six plug connectors (8).
5.
Remove 11 nuts (1), lockwashers (2), screws (4), clamps (3), and chassis wiring harness (6). Discard
lockwashers.
6.
Remove four grommets (7).
8
6
6
4
3
1
2
5
5
4
1
2
3
7
7
INSPECTION
1.
Inspect for cracks, breaks, or other damage.
2.
Replace defective parts.
INSTALLATION
1.
Install four grommets (7).
2.
Position chassis wiring harness (6) and install 11 clamps (3), screws (4), new lockwashers (2), and
nuts (1).
