5-5
TM 9-2330-238-14
5-4. CHASSIS WIRING HARNESS REPLACEMENT (Con’t).
b.
INSTALLATION
NOTE
Number of clamps and screws will vary between models.
1.
Position wiring harness (7) on frame and secure with screws (11) and clamps (10), new Iockwashers (8), and
nuts (9) as necessary.
NOTE
Ground wire terminal is secured with one of four screws.
2.
Position receptacle (2) on crossmember (3). Install four screws (1), new Iockwashers (4), and nuts (5).
3.
Connect connector (6) to receptacle (2).
4.
Connect all cable connectors to receptacle.
