TM 9-2330-238-14
Section Il. ELECTRICAL SYSTEM MAINTENANCE
5-4. CHASSIS WIRING HARNESS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Towing vehicle Intervehicular cable disconnected
• Marker tags (item 15, Appendix E)
from semitrailer (para 2-11).
l Eight lockwashers
Tools/Test Equipment:
l General mechanic’s tool kit
a.
REMOVAL
1.
Tag and disconnect connector (6) and all cable connectors from receptacle (2).
2.
Remove four nuts (5), lockwashers (4), and screws (1) securing receptacle (2) to crossmember (3). Remove
receptacle. Discard Iockwashers.
NOTE
Number of clamps and screws will vary between models.
3.
Remove nuts (9), lockwashers
harness. Discard lockwashers.
(8), screws (11), and clamps (10) securing harness (7) to frame. Remove
TA702059
5-4
