TM 9-2330-238-14
4-70. FUEL LINES AND ELECTRICAL FUEL PUMP REPLACEMENT (Cont).
4.
Install fuel filters (35) on nipples (36). Install shut-off cocks (34) on fuel filters.
5.
Position tube (38) on shut-off cock (34) and tighten two tube nuts (33). Install tube tee (26) on other end of tube
and tighten tube nut.
6.
Position tube (24) on tube tee (26) and tighten tube nut (25).
7.
Position tube (23) on tube tee (26) and tighten tube nut (22). Install fuel shut-off valve (42) on other end of tube
and tighten tube nut.
8.
Position tube (21) on fuel shut-off valve (42) and fuel tank and tighten tube nuts (20).
9,
Connect fuel pump electrical connectors (39). Install two loop clamps (41) on fuel pump electrical connectors
and tube (23) and secure with screw (40).
e.
REMOVAL (M749 SOUTHWEST MODEL VRP SERIAL NUMBERS V549 THROUGH V628)
NOTE
For fuel pump removal only perform steps 4 through 6.
1.
Remove screw (50) and loop clamp (52) from electrical connectors (51 ). Disconnect electrical connectors.
2.
Loosen two tube nuts (47) and remove tube (48) from elbow (49) and adapter (46). Remove adapter from
connector (45).
T A 7 0 2 0 37
4-162