TM 9-2330-238-14
4-70. FUEL LINES AND ELECTRICAL FUEL PUMP REPLACEMENT (Con’t).
4.
Install elbow (49) in fuel pump (55).
5.
Install connector (45) on heater and secure with two screws (43) and new Iockwashers (44).
6.
Install adapter (46) in connector (45), Position tube (48) on elbow (49) and adapter and tighten two tube nuts
(47).
7,
Connect electrical connectors (51). Install loop clamp (52) on electrical connectors and secure with screw (50).
g.
REMOVAL (M749 CONVERTO MODEL 8929)
NOTE
For fuel pump removal only perform steps 4 through 9.
1.
Remove 10 screws (67), Iockwashers (68), and fuel line cover (69). Discard Iockwashers.
2.
Loosen two tube nuts (77) and remove tube (70) from fuel tank and fuel shut-off cock (78).
TA702040
4-165
