4-159
TM 9-2330-238-14
4-70. FUEL LINES AND ELECTRICAL FUEL PUMP REPLACEMENT (Con’t).
6.
Remove fuel pump elbow (11 ) from fuel pump (12). Remove two screws (13) and fuel pump.
electrical lead from fuel pump.
7.
Loosen tube nut (19) and remove tube (18) from heater (l).
I b.
INSTALLATION (M313, M447, M447C, AND M750) I
Disconnect
1.
2.
3.
4.
NOTE
For fuel pump Installation only perform steps 2 through 4.
Position tube (18) on heater (1) and tighten tube nut (19).
Connect electrical lead on fuel pump (12).
Position fuel pump (12) in place on mounting bracket and secure with two screws (13).
Install fuel pump elbow (11) in fuel pump (1 2), Position tube(14) and nonmetallic conduit(15) on heater (1) and
fuel pump elbow. Tighten tube nuts (5).
TA702034
