TM 5-4930-244-14
b. Installation.
NOTE
Check all ducts and hoses for defects; replace as needed.
(1)
Install heat inlet (14) to bracket (17) by installing two bolts (15) and two lockwashers (16).
(2)
Slide hose (12) onto heater plenum (13) and heat inlet (14). Tighten clamps (11).
(3)
Install heater ducts (19) onto heater plenum (13), slide clamps (18) up and tighten.
(4)
Slide interflex hose (8) and fiberglass sleeving (9) onto diverter (7) and tube (10) on lube tank.
(5)
Slide u-clamps (3) around interflex hose (8) and install two brackets (2), securing them using four nuts (1).
(6)
Slide interflex hose (4) and fiberglass sleeving (5) onto diverter (7) and muffler assembly (6).
(7)
Slide u-clamps (3) around interflex hose (4) and Install two brackets (2), securing them using four nuts (1).
4-148
