TM 5-4930-244-14
c. Installation.
NOTE
Before installation, wrap threads on male threads of fuel pump (1) with Teflon
Tape.
(1)
Install elbow (7) and elbow (15) with hose barb (4) attached onto fuel pump (1).
(2)
Align fuel pump (1) on heater cover (11) and install two bolts (13) and two flanged locknuts (13), securing fuel
pump (1).
(3)
Replace heater cover (11) together with attached pump (1). Tighten screw (12). Replace heater control box (10)
and attach with three self tapping screws (9).
(4)
Reconnect power wire connector (8).
(5)
Install fuel supply line (6) to elbow (7) by tightening female swivel (5).
(6)
Install fuel discharge line (3) onto hose barbs (4) and tighten two hose clamps (2).
(7)
Connect negative battery cable (para 4-26)
4-139
