TM 5-4930-244-14
b.
Installation.
(1)
Position one person at each corner of enclosure (4), locate and grasp lifting handles (7).
(2)
Lift enclosure (4) up and onto the skid assembly (8).
(3)
Attach four lifting rings (5) and washers (6) to enclosure (4)
(4)
Slide fuel cap (2) and neck assembly (3) through hole opening in enclosure (4), until cap housing (9) is flush
with opening in enclosure.
(5)
Install four thumb screws (1) into cap housing (9) locking assembly in place
4-13
