TM 5-3825-230-14&P
4-102. HYDRAULIC MOTOR AND MOUNT REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-116
Motor guard removed
Shop Equipment, Automotive Maintenance and
Para 4-105
Hydraulic motor inlet
Repair; Organizational Maintenance, Common
and outlet hoses
No. 1, Less Power
removed.
Materials/Parts
Locknuts
a.
Removal.
(1)
Remove two locknuts (1), two screws (2),
two washers (3), and mount (4) using a 3/4
in. open end wrench, ratchet and 3/4 in.
socket.
(2)
Remove two locknuts (5) using a 3/4 in.
open end wrench.
(3)
Remove motor (6) by pulling out and away
from mount (4)
b.
Installation.
NOTE
Make sure hose connections are
pointing to rear of sweeper.
(1)
Position motor (6) on mount (4), and install
two locknuts (5) using a 3/4 in. open end
wrench.
(2)
Install motor (6) shaft into core shaft (7).
(3)
Install screws (2), washers (3), and locknuts (1) using a 3/4 in. open end wrench, ratchet and 3/4 in. socket.
NOTE
Follow-on maintenance:
•
Install motor inlet and outlet hoses (para 4-105)
•
Install motor guard (para 4-116)
END OF TASK
4-180
