TM 5-3825-230-14&P
d. Assembly.
(1)
Pack bearing (8) with grease.
(2)
Install inner bearing race (9), inner bearing (8),
and inner seal (7) using a block of wood and ball
peen hammer.
(3)
If removed, install outer bearing race (10) using
a block of wood and ball peen hammer.
e. Installation.
(1)
Install hub (6).
(2)
Pack outer bearing (5) with grease and install bearing in hub (6).
(3)
Install washer (4), and nut (3).
(4)
Using a torque wrench and 1-1/8 in. socket, tighten nut (3) to 40 lb.-ft (54 N.m) while rotating hub right and left.
Wheel should turn freely. Backoff nut 1/4 to 1/3 turn.
(5)
Install cotter pin (2) using pliers and dust cap (1) using a hammer.
4-145
