TM 5-3825-230-14&P
(5)
Install wire (16), star washer (15), and screw
(14) on solenoid (13) using a flat tip screwdriver.
(6)
Install three wires (12), lockwasher (11), and nut
(10) on solenoid (13).
(7)
Connect spray pump wire (8) on connector (9).
NOTE
Ground wire to engine is connected
to
terminal
marked
BAT-
on
alternator. Main harness wire is
connected to terminal marked BAT+
on alternator.
(8)
Install main harness wire (7), washer (6), and
nut (5) on alternator (4) using a 7/16 in. open
end wrench.
(9)
Install ground wire (3), washer (2), and nut (1)
on alternator (4) using a 7/16 in. open end
wrench.
NOTE
Follow-on maintenance:
Connect battery cables (para 4-73)
Close access covers (para 3-5)
END OF TASK
4-133