TM 5-3825-230-14&P
4-81. ENGINE AND BATTERY WIRE HARNESS REPLACEMENT (CONT).
(6)
Remove nut (17), washer (18), star washer (19), screw (20), and tag and remove ground wire (21) from frame
(22) using a 9/16 in. open end wrench.
(7)
Remove screw (23), lockwasher (24), tag and remove ground wire (25), and wire (21) from motor mount (26)
using a 17 mm open end wrench.
(8)
Remove key switch wires (para 4-60).
(9)
Remove ammeter wires (para 4-62).
b. Installation.
(1)
Install ammeter wires (para 4-62).
(2)
Install key switch wires (para 4-60).
(3)
Install ground wires (21 and 25), lockwasher (24), and screw (23) on motor mount (26) using a 17 mm open end
wrench.
(4)
Install ground wire (21), star washer (19), screw (20), washer (18), and nut (17)on frame (22) using a 9/16 in.
open end wrench.
4-132
