TM 5-3825-230-14&P
4-51.
MUFFLER REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Shop Equipment, Automotive Maintenance and
TM or Para
Condition Description
Repair; Organizational Maintenance, Common
Para 4-98
Top access panel
No.1, Less Power
removed.
Para 3-5
Right side access cover
Materials/Parts
opened.
Gasket
a.
Removal.
WARNING
The exhaust pipe and muffler can become very hot during vehicle operation. Be careful not to
touch these parts with bare hands, or allow body to come in contact with pipe or muffler.
Exhaust system parts can become hot enough to cause serious burns.
(1)
Loosen clamp (1) using a 1/2 in. open end wrench. Remove pipe (2) from muffler (3).
(2)
Remove four nuts (4) and muffler (3) from engine (5) using a 12 mm open end wrench.
NOTE
Make sure all old gasket material is removed from engine.
(3)
Remove two gaskets (6) from engine (5), muffler (3), and studs (7).
4-74
