TM 5-3825-230-14&P
WARNING
Be sure engine is cool before starting this procedure or injury to personnel may result.
a.
Removal.
NOTE
Tag all wires before removal to aid installation.
(1)
Remove nut (1), lockwasher (2), and tag and remove wire (3) from glow plug (4) using a 5/16 in. open end
wrench.
(2)
Remove nut (5), lockwasher (6), wire (3) and tag and remove wire (7) from glow plug (8) using a 5/16 in. open
end wrench.
(3)
Remove glow plugs (4 and 8) from intake manifold (9) using a 1 in. box end wrench.
(4)
Remove washers (10) from glow plugs (4 and 8).
b.
Installation.
(1)
Install washers (10) on glow plugs (4 and 8).
WARNING
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors and are
harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
(2)
Apply thin coat of thread locking compound to glow plugs (4 and 8) threads.
(3)
Install glow plugs (4 and 8) in intake manifold (9) using a 1 in. box end wrench.
(4)
Refer to tags and install wires (3 and 7), lockwasher (6), and nut (5) on glow plug (8) using a 5/16 in. Open end
wrench.
(5)
Refer to tags and install wire (3), lockwasher (2), and nut (1) on glow plug (4) using a 5/16 in. open end wrench.
NOTE
Follow-on Maintenance:
•
Install top access panel (para 4-98)
•
Connect battery cables (para 4-73)
END OF TASK
4-73
