TM 5-3825-230-14&P
4-35. FUEL PUMP REPLACEMENT (CONT).
(2)
Remove gasket (4) from fuel pump (3) and remove pin (5). Make sure all pieces of gasket are removed.
(3)
Loosen clamp (6) and remove hose (7) from barbed fitting (8) using a flat tip screwdriver.
(4)
Remove connecting bolt (9), copper washer (10), barbed fitting (8), and copper washer (11) from fuel pump (3)
using a 19 mm open end wrench.
b. Installation.
NOTE
For ease of installation, install left nut first.
(1)
Install pin (5), gasket (4), fuel pump (3), two lockwashers (2), and two nuts (1). Tighten nuts to 22 lb-ft (30 N•m)
using a torque wrench, extension and 12 mm socket.
(2)
Install copper washer (11), barbed fitting (8), copper washer (10), and connecting bolt (9) on fuel pump (3) using
a 19 mm open end wrench.
(3)
Position clamp (6) loosely on hose (7).
(4)
Install hose (7) on barbed fitting (8). Tighten clamp (6) using a flat tip screwdriver.
NOTE
Follow-on maintenance: Connect fuel line (pump to filter) (para 4-43)
END OF TASK
4-42
