TM 5-3825-230-14&P
4-32. INTAKE MANIFOLD REPLACEMENT (CONT).
b. Installation.
(1)
Position gaskets (6) and manifold (3) on studs (7), and install four lockwashers (5) and four nuts (4). Tighten nuts
to 22 Ib-ft (30 N•m) using a torque wrench, extension and 13 mm socket.
(2)
Position clamp (1) loosely on hose (2) and install hose on manifold (3). Tighten clamp using a flat tip
screwdriver.
(3)
Position clamp (8) loosely on rubber cap (9) and install cap on manifold (3). Tighten clamp using a flat tip
screwdriver.
NOTE
Follow-on maintenance:
•
Install glow plugs (para 4-50)
•
Install muffler (para 4-51)
•
Install vapor separator fitting (para 4-38)
END OF TASK
4-38
