Section X. MAINTENANCE OF THE ELECTRICAL SYSTEM
4-28. Alternator
a. Removal (fig 4-11).
(1) Loosen alternator mounting bolt and adjusting arm bolt.
Move alternator toward engine and remove belt from pulley.
(2) Remove nuts and lockwashers from alternator terminals
to disconnect electrical wires from the terminals. Mark the wires
to be sure of proper connection when alternator is replaced.
(3) Remove the bolt and washer attaching the alternator to
adjusting arm.
(4) Remove the bolt, nut, and lockwasher attaching the
alternator to mounting bracket.
(5) Remove the alternator.
b. Installation.
Install alternator by reversing removal
procedure.
Figure 4-11. Alternator. Removal and installation.
4-20