TM 5-3805-296-23-6
0429
REMOVAL CONTINUED
4. Remove four bolts (Figure 12, Item 6), washers (Figure 12, Item 7), two flange halves (Figure 12, Item 8), and
hydraulic hose (Figure 12, Item 5) from hydraulic line (Figure 12, Item 4).
5. Remove O-ring (Figure 12, Item 9) from hydraulic hose (Figure 12, Item 5). Discard O-ring.
6. Remove four bolts (Figure 12, Item 10), washers (Figure 12, Item 11), two flange halves (Figure 12, Item 13),
and hydraulic line (Figure 12, Item 12) from hydraulic line (Figure 12, Item 4).
7. Remove O-ring (Figure 12, Item 14) from hydraulic line (Figure 12, Item 12). Discard O-ring.
8. Remove two bolts (Figure 12, Item 3), washers (Figure 12, Item 2), and hydraulic line (Figure 12, Item 1) from
bracket (Figure 12, Item 1).
9. Remove hydraulic line (Figure 12, Item 4) from machine.
Figure 12. Crossover Line, Left.
0429
END OF TASK
CLEANING AND INSPECTION
000429
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK