TM 5-3805-296-23-6
0421
INSTALLATION CONTINUED
4. Install ejector cylinder (Figure 20, Item 2) on front cylinder mount (Figure 20, Item 1).
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
5. Apply antiseize compound to front pivot (Figure 20, Item 3) and install front pivot on cylinder mount
(Figure 20, Item 1) and ejector cylinder (Figure 20, Item 2).
Figure 20. Front Pivot.
0421