TM 5-3805-296-23-6
0420
REMOVAL
000420
1. Start machine and allow engine to idle (TM 5-3805-296-10).
2. Lift bowl (Figure 1, Item 1) to highest position (TM 5-3805-296-10).
3. Place jack trestles (Figure 1, Item 2) under bowl (Figure 1, Item 1).
4. Lower bowl (Figure 1, Item 1) on to jack trestles (Figure 1, Item 2) (TM 5-3805-296-10).
5. Stop machine (TM 5-3805-296-10).
6. Relieve hydraulic system pressure (WP 0326).
7. Remove apron lift frame (WP 0412).
Figure 1. Jack Trestles.
0420
8. Remove bolt (Figure 2, Item 3), washer (Figure 2, Item 4), and clamp (Figure 2, Item 1) from hydraulic hose
insulation (Figure 2, Item 2) and boss (Figure 2, Item 5).
Figure 2. Right Hydraulic Hose Clamp.
0420