TM 5-3805-296-23-6
0392
ASSEMBLY CONTINUED
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
34. Apply sealant to two purge screws (Figure 42, Item 3) and install purge screws on cylinder ends
(Figure 42, Item 2).
35. Install two dust covers (Figure 42, Item 1) on cylinder ends (Figure 42, Item 2).
Figure 42. Purge Screws.
0392
END OF TASK