TM 5-3805-296-23-6
0392
ASSEMBLY CONTINUED
19. Install new wear ring (Figure 36, Item 2) on piston (Figure 36, Item 4).
20. Install two new piston seals (Figure 36, Items 1 and 3) on piston (Figure 36, Item 4).
Figure 36. Piston.
0392
NOTE
All internal O-rings and seals are lubricated with hydraulic oil prior to assembly. Refer to
lube order for lubrication information (LO 5-3805-296-13).
Install cylinder end as noted during removal.
21. Install piston rod (Figure 37, Item 3) on cylinder end (Figure 37, Item 4).
22. Install new O-ring (Figure 37, Item 5) on cylinder end (Figure 37, Item 4).
23. Install piston (Figure 37, Item 2) on piston rod (Figure 37, Item 3).
24. Install rod (Figure 37, Item 1) on piston rod (Figure 37, Item 3).
25. Lubricate O-ring (Figure 37, Item 5) and piston (Figure 37, Item 2) with hydraulic oil.
Figure 37. Piston Rod.
0392
